IPv6 Configuration

From AAISP Support Site
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is: An IPv6 address on the LAN subnet ra="true" in the subnet