IPv6 Configuration

From AAISP Support Site
Jump to navigation Jump to search

Related Pages on the A&A Website:

Useful Blog/HOWTO Entries

Consumer CPE Equipment

The following equipment has been successfully used as an IPv6 Router for home use

  • Linksys NSLU2 running OpenWRT 10.03 (Backfire) with a Netgear DM111P ADSL2+ DSL Modem
  • Netgear DG834v2 running OpenWRT 8.09 (Kamikaze)

IPv6 over IP Tunnelled Connections

See also the configuration examples on the IPv6 Knowledge-base page referenced above.

FireBrick 2500/2700

It's quite easy.... Assuming you have an IPv6 block allocated to your line on Clueless and you're using the FB for PPPoE, then all the FB config needs is: An IPv6 address on the LAN subnet ra="true" in the subnet