Difference between revisions of "Interleaving"

From AAISP Support Site
Jump to navigation Jump to search
[unchecked revision][unchecked revision]
m
m
Line 13: Line 13:
 
== TalkTalk lines ==
 
== TalkTalk lines ==
 
The interleaving is set when selecting the line profile, see: [[TalkTalk_Wholesale_Line_Profiles|Adjusting the profile]]
 
The interleaving is set when selecting the line profile, see: [[TalkTalk_Wholesale_Line_Profiles|Adjusting the profile]]
  +
  +
  +
[[Category:Line Profiles]]
  +
[[Category:Line_Settings]]

Revision as of 11:07, 25 February 2015

Availability

Interleaving Options

Interleaving affects the way error detections & correction is applied to the line. These changes take a day to take effect.

With interleaving off the round trip ("ping") time is faster (around 12ms when off, around 28ms when on). However the line is less able to cope with noise, which may cause more frequent retraining and/or a lower sync speed and BRAS rate.

The options are "Set interleave off", "Set interleave on" and "Set auto interleave" (interleave is automatically controlled by the exchange depending on the measured stability of the line).

TalkTalk lines

The interleaving is set when selecting the line profile, see: Adjusting the profile