L2TP Client: Routerboard: Difference between revisions

Back up to the Incoming L2TP Category
From AAISP Support Site
(Created page with "__NOTOC__<indicator name="L2TP">link=:Category:Incoming_L2TP|30px|Back up to the Incoming L2TP Category</indicator> Category:Incoming_L2TP == Router...")
 
(→‎top: clean up)
 
Line 1: Line 1:
__NOTOC__<indicator name="L2TP">[[File:Menu-L2TP.svg|link=:Category:Incoming_L2TP|30px|Back up to the Incoming L2TP Category]]</indicator>
__NOTOC__<indicator name="L2TP">[[File:Menu-L2TP.svg|link=:Category:Incoming L2TP|30px|Back up to the Incoming L2TP Category]]</indicator>
[[Category:Incoming_L2TP]]
[[Category:Incoming L2TP]]
== RouterBoard ==
== RouterBoard ==



Latest revision as of 00:02, 18 August 2018

RouterBoard

Connecting to L2TP with a RouterBoard was pretty seamless - put in the L2TP server IP, username and password and it just connects. Have to mess about with IP / Route and NAT / masquerading a bit to get devices behind the RouterBoard online but that all depends on whether you have an additional IP block and what you want to do with it anyway.