L2TP Overview: Difference between revisions

From AAISP Support Site
m (AA-Andrew moved page L2TP to L2TP Overview)
Line 20: Line 20:
*[[:Category:Mobile_L2TP_Handover]]
*[[:Category:Mobile_L2TP_Handover]]


=L2TP from Customer to AAISP=
=L2TP from Customers to AAISP=
This is used to connect in to AAISP over a third-party internet connection. This gives you your usual AAISP IP (4 and 6) blocks and access to the internet as if you were conencted via a normal DSL circuit.

* Hostname: l2tp.aa.net.uk
* Hostname: l2tp.aa.net.uk
* Plain L2TP without any IPsec
* Plain L2TP without any IPsec

Revision as of 09:51, 9 May 2016

Overview

We can use L2TP for various things! For example:

  • AAISP Data SIMs can be relayed on to your L2TP server
  • AAISP DSL lines can be relayed on to your L2TP server
  • You can connect in to AAISP over an L2TP tunnel from a non-AAISP internet connection

See below for the links to more information.

  • Also see FireBrick L2TP Server regarding the FireBrick being an L2TP 'server' - e.g. for Data SIMs to connect to.


L2TP from AAISP SIMs/DSLs to Customers own L2TP server

L2TP settings are set by staff, so please do contact them for any changes or setup. The information that would be requested is:

  • Target IP (with an optional backup IP) - the L2TP server at your side
  • Host - the hostname we present
  • Secret - the password we use (optional)

For more information, see:

L2TP from Customers to AAISP

This is used to connect in to AAISP over a third-party internet connection. This gives you your usual AAISP IP (4 and 6) blocks and access to the internet as if you were conencted via a normal DSL circuit.

  • Hostname: l2tp.aa.net.uk
  • Plain L2TP without any IPsec
  • MSCHAPv2 authentication

For more information, see: