L2TP Starlink: Difference between revisions

Back up to the Incoming L2TP Category
From AAISP Support Site
mNo edit summary
mNo edit summary
Line 6: Line 6:
We have customers using our L2TP service over their Starlink, and the initial reports are that:
We have customers using our L2TP service over their Starlink, and the initial reports are that:
* Speed is good (especially compared to their slow DSL service)
* Speed is good (especially compared to their slow DSL service)
*Latency is OK - about 40-50ms, but there are some latency spikes
* Latency is OK - about 40-50ms, but there are some latency spikes
*Slight packetloss
* Slight packetloss
*Overall - worth it!
* Overall - worth it!

Out L2TP service enables the Starlink customer to have public IPv4 and IPv6 addresses.


Here is a graph from an L2TP service:
Here is a graph from an L2TP service:


[[File:Starlink0l2tp.png|frame|none|L2TP over Starlink - showing slight packet loss and some latency spikes]]
[[File:Starlink0l2tp.png|frame|none|L2TP over Starlink - showing slight packet loss and some latency spikes]]

Note: This feedback based a very small number of connections (2 as of April 2021!), so the service may vary.

Revision as of 08:34, 30 March 2021


Starlink is a satellite-based internet service and is initially provided without IPv6 and uses CGNAT for IPv4.

We have customers using our L2TP service over their Starlink, and the initial reports are that:

  • Speed is good (especially compared to their slow DSL service)
  • Latency is OK - about 40-50ms, but there are some latency spikes
  • Slight packetloss
  • Overall - worth it!

Out L2TP service enables the Starlink customer to have public IPv4 and IPv6 addresses.

Here is a graph from an L2TP service:

L2TP over Starlink - showing slight packet loss and some latency spikes

Note: This feedback based a very small number of connections (2 as of April 2021!), so the service may vary.