Openreach FTTP ONT: Difference between revisions
mNo edit summary |
m (→LED STatus) |
||
| Line 16: | Line 16: | ||
! LED !! Colour !! Meaning !! Notes |
! LED !! Colour !! Meaning !! Notes |
||
|- |
|- |
||
| '''Power''' || Green || has power |
|rowspan="2"| '''Power''' || Green || has power || Good |
||
|- |
|- |
||
| Off || no power || Check mains power |
|||
|- |
|- |
||
| '''PON''' || green || Connected and should be working || |
|rowspan="3"| '''PON''' || green || Connected and should be working || Good |
||
|- |
|- |
||
| flashing green and LOS off || ONT is starting up || Wait a bit for steady green and all should be well... |
|||
|- |
|- |
||
| |
| off and LOS red || Possible fault with the fibre || Check fibre not damaged, reconnect fibre, power cycle ONT| |
||
|- |
|- |
||
| '''PORT1''' || off || ONT has not ethernet link to the router || Check router |
|rowspan="2"| '''PORT1''' || off || ONT has not ethernet link to the router || Check router |
||
|- |
|- |
||
| |
| blinking/flashing || data being transmitted || Good |
||
|- |
|- |
||
| '''Tel''' || || We don't use the Tel ports |
| '''Tel''' || || || We don't use the Tel ports |
||
|- |
|- |
||
|Status/Fault/Charging || Related to the battery backup || |
|'''Status/Fault/Charging''' || Related to the battery backup || || |
||
|} |
|} |
||
LOS = Loss of service |
LOS = Loss of service. |
||
PON = Passive Optical Network |
PON = Passive Optical Network |
||
Revision as of 22:47, 10 November 2021
This page is about the FTTP termination device that Openreach install for FTTP customers.
The Openreach ONT is actually inside an enclosure which also contains a Battery Backup Unit (BBU) and various wiring.
The ONT requires power, so will need a mains power socket nearby.
LED STatus
| LED | Colour | Meaning | Notes |
|---|---|---|---|
| Power | Green | has power | Good |
| Off | no power | Check mains power | |
| PON | green | Connected and should be working | Good |
| flashing green and LOS off | ONT is starting up | Wait a bit for steady green and all should be well... | |
| off and LOS red | Possible fault with the fibre | ||
| PORT1 | off | ONT has not ethernet link to the router | Check router |
| blinking/flashing | data being transmitted | Good | |
| Tel | We don't use the Tel ports | ||
| Status/Fault/Charging | Related to the battery backup |
LOS = Loss of service. PON = Passive Optical Network