Openreach FTTP ONT: Difference between revisions

Back up to the Routers Category
From AAISP Support Site
(→‎LED Status: s/not/no/)
(→‎LED Status: rm trailing . from table)
Line 26: Line 26:
| Blinking/Flashing || Data being transmitted || '''Good'''
| Blinking/Flashing || Data being transmitted || '''Good'''
|-
|-
|rowspan="3"| '''LOS''' (Loss of service)<br>'''PON''' (Passive Optical Network) || PON green, LOS off || Connected and should be working || '''Good'''. This is how it should be normally.
|rowspan="3"| '''LOS''' (Loss of service)<br>'''PON''' (Passive Optical Network) || PON green, LOS off || Connected and should be working || '''Good'''. This is how it should be normally
|-
|-
| PON flashing green, LOS off || ONT is starting up || '''Wait''' a bit for steady green and all should be well...
| PON flashing green, LOS off || ONT is starting up || '''Wait''' a bit for steady green and all should be well...
|-
|-
| PON off, LOS red || Possible fault with the fibre || '''Bad'''. Check fibre not damaged, reconnect fibre, power cycle ONT.
| PON off, LOS red || Possible fault with the fibre || '''Bad'''. Check fibre not damaged, reconnect fibre, power cycle ONT
|-
|-
|rowspan="2"| '''POWER''' || Green || Device has power || '''Good'''
|rowspan="2"| '''POWER''' || Green || Device has power || '''Good'''
|-
|-
| Off || Power is off || '''Bad'''. Check mains power and connection to BBU/ONT.
| Off || Power is off || '''Bad'''. Check mains power and connection to BBU/ONT
|-
|-
! colspan=6 | Bottom right (BBU) LEDs
! colspan=6 | Bottom right (BBU) LEDs
Line 40: Line 40:
|'''STATUS''' || Green || || '''Good'''
|'''STATUS''' || Green || || '''Good'''
|-
|-
|'''FAULT''' || Red || Battery fault || '''Bad'''. Replace the AA batteries inside.
|'''FAULT''' || Red || Battery fault || '''Bad'''. Replace the AA batteries inside
|-
|-
|rowspan="2"|'''CHARGING''' || Orange || || '''Wait'''; the batteries are charging (usually after a power cut).
|rowspan="2"|'''CHARGING''' || Orange || || '''Wait'''; the batteries are charging (usually after a power cut)
|-
|-
| Off || || '''Good'''. The batteries are fully charged.
| Off || || '''Good'''. The batteries are fully charged
|}
|}



Revision as of 01:54, 11 November 2021


Openreach ONT with BBU in enclosure

This page is about the FTTP termination device that Openreach install for FTTP customers.

Older Openreach ONT (Optical Network Termination) such as the one pictured, is actually inside the enclosure. This also contains a Battery Backup Unit (BBU) along with various wiring and cable management.

Newer ONT installs do not include the BBU, and are also not in a larger enclosure.

The ONT requires power, so will need a mains power socket nearby.

LED Status

Openreach ONT LED Status
LED Colour Meaning Notes
Top (ONT) LEDs
TEL1 We don't use the Tel ports
PORT1 Off ONT has no ethernet link to the router Bad. Check the connection/cable to the router
Blinking/Flashing Data being transmitted Good
LOS (Loss of service)
PON (Passive Optical Network)
PON green, LOS off Connected and should be working Good. This is how it should be normally
PON flashing green, LOS off ONT is starting up Wait a bit for steady green and all should be well...
PON off, LOS red Possible fault with the fibre Bad. Check fibre not damaged, reconnect fibre, power cycle ONT
POWER Green Device has power Good
Off Power is off Bad. Check mains power and connection to BBU/ONT
Bottom right (BBU) LEDs
STATUS Green Good
FAULT Red Battery fault Bad. Replace the AA batteries inside
CHARGING Orange Wait; the batteries are charging (usually after a power cut)
Off Good. The batteries are fully charged

External links