Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

Router - RouterOS and Routerboard: Difference between revisions

no edit summary
No edit summary
No edit summary
= Overview =
 
Page created by Nicholas Barnes - [[http://www.vitell.co.uk/ Vitell]] - [[http://www.vitell.co.uk/ RouterOS Consultants]].
 
Here we will build a basic configuration for RouterOS. The examples are relevant for ADSL (Be and BT) as well as FTTC/FTTP through AAISP.
scope=30 \
target-scope=10</pre>
Which should give you full connectivity. Note that you could skip the add routes bit by changing 'add-default-route' to 'yes' in the PPPoE interface definition. Adding routes manually is more flexible, but for a basic configuration probably isn't required.
 
Now add any firewall filter and mangle rules required followed by any queue entries.
 
Then, make sure IPv6 neighbour detection is configured properly.
8

edits