Router - TG582N: Difference between revisions

From AAISP Support Site
(Redirected page to Category:Router TG582N)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
= Technicolor TG582N =
#REDIRECT [[:Category:Router TG582N]]
[[Image:T582-small.png]]

This page has information, config pointers for the Technicolor TG582N ADSL Router.

= Other Settings & Config info =

== Firewall & Security Related==

=== Disable all ALG ===

You can flush all ALG bindings with the command:

connection flush
saveall

This isn't well tested - please let us know if anything breaks when you do this!

===Disable WAN access to HTTP/Telnet:===
This will disable WAN access to the routers adminitrator services

To disable WAN access to HTTP, HTTPS and telnet:
service system ifdelete name=HTTP group=wan
service system ifdelete name=HTTPs group=wan
service system ifdelete name=TELNET group=wan

To view the settings:
service system list name=HTTP expand=enabled
service system list name=TELNET expand=enabled

It should say:
Interface Group Access List lan

Save the settings:
saveall

To later revert the setting, add back wan access by:
service system ifadd name=HTTP group=wan
saveall

== Disable Wifi (Wireless) ==
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply

== Other Settings ==

=== Changing PPP Password, via telnet CLI ===

The command ''should'' be:

ppp ifconfig intf=Internet user=x@a password=secret status=enabled

=== TR069 ===
Routers should be configured by AAISP to talk back to the AAISP TR069 server - this allows management of firmware and config by AAISP staff if required. Some older routers may not be set up correctly, and some routers on older firmware (v8) on Non natted connections may not be able to talk to the TR069 server due to a firmware bug. Routers with version 10 firmware are likely to be configured ok though.
To View the TR069 settings, via telnet:
cwmp server config



=== 3G setup ===

I've only worked out some of this, but I found the following got a dongle working:

{Administrator}=>mobile ifadd intf=umts
{Administrator}=>mobile ifconfig intf=umts apn=CHANGEME
{Administrator}=>ppp ifadd intf=mobilebroadband
{Administrator}=>ppp ifconfig intf=mobilebroadband dest=umts
{Administrator}=>nat ifconfig translation=enabled intf=mobilebroadband
{Administrator}=>ppp rtadd intf=mobilebroadband dst=0.0.0.0
{Administrator}=>exit

I then went to the web interface http://192.168.1.254/_pppom_cfg.lp?be=0&l0=2&l1=2&name=mobilebroadband - replace 192.168.1.254 with the IP address of your router, and entered the username, password, and APN. For my vodafone SIM, the username was web, the password was web, and the APN was pp.internet.

Some further notes and sources on my blog:

*http://www.mstevens.org/aa/tg582-3g.html
*http://www.mstevens.org/aa/tg582-3g-2.html

(feel free to copy here if you want)

== Third Party Pages ==

Here is someone elses page with telnet commands and info regarding the Technicolor:

*http://npr.me.uk/telnet.html
*http://www.poly-math.com/blog/?p=68

Plusnet have firmware for this router at:
[http://community.plus.net/forum/index.php/topic,104248.msg888034.html#msg888034 R10.0.2.0] and [https://community.plus.net/forum/index.php/topic,106578.0.html R10.2.2.9].
In most cases AAISP and can upgrade customers firmware remotely, please do contact Support for more information on this. The Plusnet firmware has not been tried and tested by AAISP and can't give much help if it doesn't work for you.


[[Category:ADSL]] [[Category:Router]][[Category:Internet]][[Category:FTTC]]

Latest revision as of 08:54, 18 June 2013