Router - TG582N - Bridge: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing! |
This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing! |
||
We would recommend a ZyXEL P660-D1 or a [Router- DLINK 320B|Dlink] if you are looking for a bridge device. |
|||
We cannot support this if you break it, sorry. |
|||
Notes from the customer: |
Notes from the customer: |
||
Revision as of 10:41, 12 July 2013
It may be possible to configure the router so that it acts as a bridge and not a router.
This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing!
We would recommend a ZyXEL P660-D1 or a [Router- DLINK 320B|Dlink] if you are looking for a bridge device.
We cannot support this if you break it, sorry.
Notes from the customer:
It doesn't seem possible to make it work without two internet connections being configured, even though 'Internet2' is disconnected. I removed it's config and restored, and the ethernet ports didn't want to come up!
I essentially took a config I found for the BE 'bebox' and merged sections with the default config that come with the router. I am sure it could be made cleaner, and it could be possible to rid the 'Internet2' and still have it work.
Config file: File:AA TG582n Bridge config.ini.zip.zip
Other pages regarding this router:
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>