Router - TG582N - Bridge: Difference between revisions

From AAISP Support Site
No edit summary
No edit summary
Line 21: Line 21:
'Internet2' and still have it work.''
'Internet2' and still have it work.''


Config file: [[File:AA_TG582n_Bridge_config.ini.zip.zip]]
'''Config file:''' [[File:AA_TG582n_Bridge_config.ini.zip.zip]]


==Other pages regarding this router:==
==Other pages regarding this router:==

Revision as of 10:44, 12 July 2013

Got to Main TG582N Page

It may be possible to configure the router so that it acts as a bridge and not a router.

This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing!

We would recommend a ZyXEL P660-D1 or a Dlink if you are looking for a bridge device.

We cannot support this if you break it, sorry.

Notes from the customer:

It doesn't seem possible to make it work without two internet connections being configured, even though 'Internet2' is disconnected. I removed it's config and restored, and the ethernet ports didn't want to come up!

I essentially took a config I found for the BE 'bebox' and merged sections with the default config that come with the router. I am sure it could be made cleaner, and it could be possible to rid the 'Internet2' and still have it work.

Config file: File:AA TG582n Bridge config.ini.zip.zip

Other pages regarding this router:

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>