Router - TG582N - Bridge: Difference between revisions

From AAISP Support Site
No edit summary
No edit summary
Line 5: Line 5:
This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing!
This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing!


We would recommend a [[Router_-_ZyXEL_P660R-D1|ZyXEL P660-D1]] or a [[Router - DLINK 320B|Dlink]] if you are looking for a bridge device.
We would recommend a [[Router_-_ZyXEL_P660R-D1|ZyXEL P660-D1]] or a [[Router - DLINK 320B|Dlink]] if you are looking for a bridge device, this are available to purchase from Sales.


We cannot support this if you break it, sorry.
We cannot support this if you break it, sorry.

Revision as of 10:45, 12 July 2013

Got to Main TG582N Page

It may be possible to configure the router so that it acts as a bridge and not a router.

This information is from a customer, and is not supported by AAISP, we would only suggest you use this if you're sure you know what you're doing!

We would recommend a ZyXEL P660-D1 or a Dlink if you are looking for a bridge device, this are available to purchase from Sales.

We cannot support this if you break it, sorry.

Notes from the customer:

It doesn't seem possible to make it work without two internet connections being configured, even though 'Internet2' is disconnected. I removed it's config and restored, and the ethernet ports didn't want to come up!

I essentially took a config I found for the BE 'bebox' and merged sections with the default config that come with the router. I am sure it could be made cleaner, and it could be possible to rid the 'Internet2' and still have it work.

Config file: File:AA TG582n Bridge config.ini.zip.zip

Other pages regarding this router:

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>