Router - Technicolor DWA0120

From AAISP Support Site
Revision as of 09:05, 30 September 2020 by AA-Andrew (talk | contribs) (Factory Default Admin Username/Password)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Factory Default Admin Username/Password

Default/Factory Password
IP: 192.168.1.1 (will change once configured if you have a block of IPv4 addresses)
Username: admin
Password: Before configured it will be as stated on the rear panel. Once configured it will be the one printed on the A&A card.
WiFi Password: Before configured it will be as stated on the rear panel as 'ACCESS KEY'. Once configured it will be the one printed on the A&A card.

Supervisor password:

The DWA0120 has an engineer user, which uses the 'ACCESS KEY' password which is printed on the base of the router.