Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

DGA0122 Public IPs: Difference between revisions

m
no edit summary
mNo edit summary
mNo edit summary
(9 intermediate revisions by the same user not shown)
<indicator name="Front">[[File:Menu-B10C.svg|link=:Category:Technicolor_DGA0122|30px|Back up to the Technicolor_DGA0122 Page]]</indicator>
[[Category:Technicolor_DGA0122]]
[[Category:Technicolor_DGA4134]]
 
 
=Unable to set or change the LAN address when using public IPs=
 
* Date reported 2020-12-08
* Software Version 19.4 (19.4.0207-4381030)
* Status: With Technicolor
 
If you want to set the Local Network IP address via the web interface to a public IP then you will get the error 'Cannot use an address in this address range' and will be unable to change it.
Staff can re-configure the LAN subnet via our TR-069 programming - this can be used if you change your block of IPs or if you want to change from using private IPs (192.168.1.1) to public ones
 
Another work around is to set up the router for dual LAN subnets - that is to have the private IPs as well as the Public Subnet. ThisSee: is[[DGA0122 achievedDual by:LAN Subnets]]
# Go to gateway tile,
# clicking configuration and then clicking 'setup your gateway'
# which you can specify a static IP address when changing the routed
# type to static.
 
Note: DHCP will use the private IPs, it's not possible to change it.
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,264

edits