Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VoIP Phones - Factory Reset: Difference between revisions

m
no edit summary
mNo edit summary
mNo edit summary
 
To set the phone back to "Admin mode", press the Settings key:
*Firmware versions lower than 7.X: - Select "Admin Mode".
*Firmware versions lower equal or greater 7.X: - Enter "Maintenance" and select "Admin Mode".
*On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.
 
*Obtain your phone's IP address and currently used firmware version by pressing the Help button on your Snom 3xx.
*Open any web browser and choose the URL corresponding to your current firmware version:
**Firmware versions lower than 3.X: - http://1.2.3.4/set_base_en.htm?reset=Reset
**Firmware versions between 3.X and 6.X: - http://1.2.3.4/advanced.htm?reset=Reset
**Firmware versions from 7.X onwards: - http://1.2.3.4/advanced_network.htm?reset=Reset
*Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.
*The phone reboots automatically and everything will be accessible again.
 
 
Reset lost HTTP password via Phone User Interface:
*Snom 360 - Press the "Settings" key and scroll down to "Reset Values". Confirm then enter the Administrator password.
*Snom 320 - Press the "Settings" key and press the soft key below the displayed "Reset" and enter the Administrator password.
*Snom 300 - Press the "Navigation Button" down and scroll until "Configuration". Press the "Navigation Button" right. Confirm then enter the Administrator password.
editor
426

edits