Difference between revisions of "Telephone Sockets"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
Line 11: Line 11:
Unfiltered_Broadband_faceplate_AAISP_Branded.svg|Unfiltered Broadband Faceplate (AAISP Branded)
Unfiltered_Broadband_faceplate_AAISP_Branded.svg|Unfiltered Broadband Faceplate (AAISP Branded)
Unfiltered_Broadband.svg|Unfiltered Broadband Faceplate (Installed)
Unfiltered_Broadband.svg|Unfiltered Broadband Faceplate (Installed)

Revision as of 10:46, 28 July 2015

There are various styles of telephone socket, most are "NTE5". This page aims to explain the various forms of this socket. NTE stands for 'Network Termination Equipment', 5 relates to the version number.

Socket Overview


This socket could be an old style master socket, or it could be a secondary socket. Openreach should not be installing this style of socket as the master socket when installing a new phone line.


This is the 'standard' socket that Openreach will install, it has been the standard since the 1980's. The lower half is removable. Removing the lower half gives access to the 'Test Socket' as well as the connectors.

VDSL Faceplate

With an engineer installed FTTC (aka VDSL, BT Infinity) a VDSL faceplate is sometimes installed. The socket at the top is a RJ11 socket and should be connected to the FTTC modem or router. The Lower socket is a BT telephone socket for a phone to connect to.

Service Specific Faceplate

Unfiltered Broadband Faceplate (Installed)

This NTE5 has been fitted with an unfiltered RJ11 socket. These faceplates are typically supplied by AAISP if they provide the phone line where no phone calls are provided. The socket is an RJ11 and so a router can be connected without the need for a filter/splitter.