VMG1312-B10A: Firewall

From AAISP Support Site
Revision as of 16:07, 31 July 2019 by Adsb (talk | contribs) (Mention that it's worth checking that a rule has been set)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The default firewall state for IPv4 and IPv6 would be enabled. This can be disabled via the AAISP control pages. Rules can be added as required.

The firewall is configured via the router's Web interface:

Security -> Firewall -> Access Control

You don't need to create any special 'protocol' lists, you can simply enter in the Target IP/Port etc. in to the rule.

From the CLI the iptables command is available, which is familiar to Linux users. If logged in as supervisor the sh command is available to get a root shell prompt, where the ip6tables command can be found.

Having added a rule via the Web interface, it is worth checking with iptables or ip6tables that it has been successful - rules don't always get set correctly and/or may not survive a power cycle.