Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VMG1312-B10A: Static Routes: Difference between revisions

m
no edit summary
mNo edit summary
mNo edit summary
==Important==
'''IMPORTANT NOTE!''' Some customers have reported static routes not working. This issue is being looked in to (July 2015). It has been suggested that disabling QoS helped, but this has yet to be verified with other setups. At the moment, we can't really suggest using static routes. Instead, we'd suggest using the ZyXEL as a bridge and perform PPPoE on your internal router/firewall. This issue is on our [[VMG1312-Bugs|Bugs Page]] as of July 2015 and has been escalated to ZyXEL. In these cases rather than using the Web interface to add the static route you can use the telnet/ssh CLI to add it. An example is below.
 
The notes below are the steps to set up a static route, but you may find it does not work.
 
Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router, eg
(Note, some people may prefer to set the ZyxEL to Bridge mode, and then have your own Router use PPP to log in. This has the advantage of keeping the ZyXEL config simpler and giving your own router more control over the Internet access.)
 
== Config via CLI ==
 
route add [network] [subnet] metric -1 gw [LAN side route] dev br0
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,264

edits