Difference between revisions of "VMG1312-B10A: Static Routes"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
(Created page with "Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router. T...")
 
m
Line 9: Line 9:
 
[[File:VMG-static.png|frame|none|Statc Route example]]
 
[[File:VMG-static.png|frame|none|Statc Route example]]
   
  +
==CLI==
[[Category:ZyXEL_VMG1312|Firewall]]
 
  +
From the CLI (telnet/SSH) you can view the route table with:
  +
show list
  +
  +
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.

Revision as of 16:55, 15 June 2015

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Statc Route example

CLI

From the CLI (telnet/SSH) you can view the route table with:

show list

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.