Difference between revisions of "VMG1312-B10A: Static Routes"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
m
m
Line 7: Line 7:
 
Here is an example:
 
Here is an example:
   
[[File:VMG-static.png|frame|none|Statc Route example]]
+
[[File:VMG-static.png|frame|none|Creating a Static Route]]
  +
  +
[[File:ZyXEL-staticroute.png|frame|none|The new Static route, as shown on the routes page]]
   
 
==CLI==
 
==CLI==

Revision as of 09:05, 16 June 2015

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Creating a Static Route
The new Static route, as shown on the routes page

CLI

From the CLI (telnet/SSH) you can view the route table with:

show list

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.