Difference between revisions of "VMG1312-B10A: Static Routes"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
m (CLI)
m
Line 16: Line 16:
   
 
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.
 
The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.
  +
  +
  +
[[Category:ZyXEL_VMG1312|Static]]

Revision as of 11:36, 16 June 2015

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Creating a Static Route
The new Static route, as shown on the routes page

CLI

From the CLI (telnet/SSH) you can view the route table with:

route show

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.