Difference between revisions of "VMG1312-B10A: Static Routes"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
m
m
Line 1: Line 1:
Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.
+
Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router, eg
  +
  +
INTERNET --> ZyXEL --> ROUTER --> LAN
   
 
The static route can be added via the web interface:
 
The static route can be added via the web interface:

Revision as of 11:51, 16 June 2015

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router, eg

INTERNET --> ZyXEL --> ROUTER --> LAN

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Creating a Static Route
The new Static route, as shown on the routes page

CLI

From the CLI (telnet/SSH) you can view the route table with:

route show

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.