VMG1312-B10A: Static Routes

From AAISP Support Site
Revision as of 09:05, 16 June 2015 by AA-Andrew (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router.

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Creating a Static Route
The new Static route, as shown on the routes page

CLI

From the CLI (telnet/SSH) you can view the route table with:

show list

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem.