VMG1312-B10A: Static Routes

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Static routes can be applied manually. This allows a second block of IP addresses allocated by AAISP to be routed to a router on your LAN on the inside of the ZyXEL router, eg

INTERNET --> ZyXEL --> ROUTER --> LAN

The static route can be added via the web interface:

Network Setting -> Routing -> Add new static route

Here is an example:

Creating a Static Route

The new Static route, as shown on the routes page

CLI

From the CLI (telnet/SSH) you can view the route table with:

route show

The list should display immediately, if there are pauses between showing the default routes and the new static then this could be an indication of a problem with DNS look-ups and should not affect the actual routing.