VMG1312-B10A: WiFi Tips

From AAISP Support Site
Revision as of 15:39, 7 July 2017 by AA-Andrew (talk | contribs) (AA-Andrew moved page VMG1312: WiFi Tips to VMG1312-B10A: WiFi Tips)

Channel and Channel Noise

The VMG1312 has a WiFi scan option that will show you the noise on the wireless channels. This setting can be found on the web interface:

Network Setting - Wireless - Channel Status
WiFi scan result example, here 3 is the channel in use, and 11 is the most noisy

By default the router will choose the channel with the least noise. If required though, the channel can be set manually via the web interface

Network Setting - Wireless

TKIP & AES

We remove TKIP from the WiFi settings and only have AES. This is due to the insecurity of TKIP. Only very old WiFi devices will require TKIP, it can be enabled on the Router's web interface if required.

Bandwidth

By default, when configured by AAISP, the Wifi is set to 20MHz. This can be changed via the web interface to 40MHz if required. 20MHz will mean less interference with other channels, but 40MHz may give faster speeds if there are a small number of other WiFi access points in your area.

WiFi Channel and bandwidth Settings

Windows 10 and 40MHz

We have seen odd problems with WiFi on 40MHz and Windows 10 not being able to see other devices on the (wired) network. This may be coincidence, but changing to 20MHz meant that these problems went away!