Back up to the VoIP Features Category

VoIP - Calling With a SIP URI

From AAISP Support Site
Revision as of 16:45, 12 December 2018 by Adsb (talk | contribs) (Show reasons why clients don't work (where it's clear))
Jump to navigation Jump to search
Calling a SIP URI with the 'Ekiga' softphone

Incoming calls can be made from the internet to your number by using a SIP URI such as:  

A call to a URI like this will be delivered just like a normal incoming call. Except the caller won't incur any call charges.

The format of your number should be in +44 format, e.g. to call AAISP support you'd use:
  • You do need to use the hostname as we use SRV records to direct the call, so using an IP address is not supported.
  • The CLI is not trusted for such calls, so are sent to your SIP handset with a ? on the front, and not passed on if the call is diverted.
  • So, for example, without any configuration or account details a softphone may call your A&A provided VoIP number, as shown in the image here.
  • As mentioned, this does require the client (the phone you're calling from) to support SRV records.

Known working clients

You may need to tell some of your contacts how to call you using a sip: URI. To help, the following SIP clients are known to work:


  • Ekiga (Linux)
  • Linphone 4.0.1 (Android)
  • Zoiper (Android)

Known not-working clients

  • Linphone 3.6.1 (Linux) - doesn't use SRV DNS records
  • CSipSimple, GS Wave - need a SIP account to be enabled