VoIP - Multple Targets

From AAISP Support Site
Revision as of 12:00, 20 June 2013 by AA-Andrew (talk | contribs)

Go to the VoIP Category

One Number, many targets

Incoming call routing is configured on the Control Pages. Call Routing is based on setting the 'Target' - a number can have multiple targets, eg, can be routed to a SIP phone as well as a mobile, and multiple other numbers. Indeed, you can also register multiple SIP phones against the same number, and calls will go to all the SIP phones that are registered.

Targets in Detail

A phone number can be given many targets, each target has a delay, so you can control which phones ring first etc.

SIP Phone

You can register multiple sip phones to our server. (single phones if you're on the legacy A server). The Tag is 4 characters that will be prefixed to the number and shown on your SIP phone display (if it has one)

Your Server

We can route calls to your own SIP server, fill in the details of your server here.

Also Ring

These are up to 10 other numbers that we'll send the call to. They can be other numbers you have with us, or can be any other number. eg mobiles, international etc - any number which you can normally dial from your account. The charge for the call will be the same as if you were dialling the call normally from your account.


Other VoIP Features:

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1>Category:VoIP Features</ncl>