Difference between revisions of "VoIP Phones - BT HomeHub"

From AAISP Support Site
Jump to: navigation, search
[unchecked revision][unchecked revision]
m
m
Line 5: Line 5:
 
FIREWALL icmp check (1 of 2): Protocol: ICMP Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable
 
FIREWALL icmp check (1 of 2): Protocol: ICMP Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable
 
This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.
 
This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.
  +
  +
  +
  +
==Firewall & Security==
  +
*You will also want to set up firewall rules, as per the [[VoIP Firewall]] page.
  +
*Also see the [[VoIP Security]] page for information about securing your VoIP service.
  +
  +
[[Category:VoIP]]
  +
[[Category:VoIP Phones]]

Revision as of 22:03, 24 August 2013

A BT HomeHub has a built in VoIP Client that works as a DECT base station. This has been known to work with the AA VoIP Service.

Disable upnp

With upnp enabled, outbound calls worked, but not inbound. With upnp enabled, incoming failed and the log said:

FIREWALL icmp check (1 of 2): Protocol: ICMP  Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable

This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.


Firewall & Security

  • You will also want to set up firewall rules, as per the VoIP Firewall page.
  • Also see the VoIP Security page for information about securing your VoIP service.