VoIP Phones - BT HomeHub: Difference between revisions

From AAISP Support Site
mNo edit summary
mNo edit summary
Line 1: Line 1:
Here are some notes from our experience of the BT supplied Homegub router.

A BT HomeHub has a built in VoIP Client that works as a DECT base station. This has been known to work with the AA VoIP Service.
A BT HomeHub has a built in VoIP Client that works as a DECT base station. This has been known to work with the AA VoIP Service.


Line 5: Line 7:
FIREWALL icmp check (1 of 2): Protocol: ICMP Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable
FIREWALL icmp check (1 of 2): Protocol: ICMP Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable
This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.
This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.

==Homehub 5, disable SIP ALG==
#Open a browser (Internet Explorer, Firefox etc) and type 192.168.1.254 or businesshub.home in the address bar. You'll see the BT Business Hub home page.
#Click on ‘Advanced Settings’
#Enter your admin password (unless this has been changed, the default admin password can be found on the bottom of the Business Hub 5 or on the plastic pull out on its back).
#Click ‘Continue to Advanced Settings’
#Click ‘Firewall’ then ‘Configuration’ and scroll down to ‘Application Layer Gateway’
#Click Yes next to ‘Disable SIP ALG’ and click ‘Apply’





Revision as of 15:35, 16 July 2015

Here are some notes from our experience of the BT supplied Homegub router.

A BT HomeHub has a built in VoIP Client that works as a DECT base station. This has been known to work with the AA VoIP Service.

Disable upnp

With upnp enabled, outbound calls worked, but not inbound. With upnp enabled, incoming failed and the log said:

FIREWALL icmp check (1 of 2): Protocol: ICMP  Src ip: 81.187.30.111 Dst ip: 192.168.1.254 Type: Destination Unreachable Code: Port Unreacheable

This was a setup, where the HomeHub was inside the network being NATed by another ADSL router. In this case, the HomeHub was only acting as a wifi access point and phone.

Homehub 5, disable SIP ALG

  1. Open a browser (Internet Explorer, Firefox etc) and type 192.168.1.254 or businesshub.home in the address bar. You'll see the BT Business Hub home page.
  2. Click on ‘Advanced Settings’
  3. Enter your admin password (unless this has been changed, the default admin password can be found on the bottom of the Business Hub 5 or on the plastic pull out on its back).
  4. Click ‘Continue to Advanced Settings’
  5. Click ‘Firewall’ then ‘Configuration’ and scroll down to ‘Application Layer Gateway’
  6. Click Yes next to ‘Disable SIP ALG’ and click ‘Apply’


Firewall & Security

  • You will also want to set up firewall rules, as per the VoIP Firewall page.
  • Also see the VoIP Security page for information about securing your VoIP service.