VoIP Phones - Cisco SPA: Difference between revisions

Back up to the VoIP Configuring page
From AAISP Support Site
(update to echo cancellation)
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 14: Line 14:
In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.
In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.


PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.
'''PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.'''

'''Do not use +44 as part of the username, otherwise the device will not register. You must use 0.'''




Line 21: Line 23:
View of the 'quick settings'
View of the 'quick settings'


[[File:CiscoSPA-1-Line.png|border|400px]]
[[File:CiscoSPA-1-Line2.png|border|400px]]


==Line Settings==
==Line Settings==

Latest revision as of 08:42, 17 November 2023

Cisco SPA120 & SPA122

SPA112.jpg
  • This is similar to the older Linksys PAP2T ATA
  • Ensure software is updated, as this does help with the quality of the audio, we upgraded to 1.3.2-XU (014) Jul 2 2013
  • Blog post regarding this
  • Does seem to work will with the modems on Sky boxes to talk home on.

The screenshots here were taken from a SPA112 which was actually set up to give a Sky box a phone line to call home on.

In short, set it up without echo cancellation, a-law only, no fax detect, no jitter adjust (set to high), UK line impedance, zero gain, etc.

PLEASE NOTE: If your line has a noticeable echo, turning on echo cancellation may assist.

Do not use +44 as part of the username, otherwise the device will not register. You must use 0.


CiscoSPA-0-Status.png

View of the 'quick settings'

CiscoSPA-1-Line2.png

Line Settings

CiscoSPA-2-Line1.png

CiscoSPA-2-Line2.png

CiscoSPA-2-Line3.png

CiscoSPA-2-Line4.png

SIP Settings

  • Change RTP Packet Size: to 0.020 (which is 20ms)

CiscoSPA-3-SIP1.png

CiscoSPA-3-SIP2.png

Regional Settings

  • Change FXS Output gain to -3 if modems have problems
  • Change the impedance setting to 370_630|310nF

CiscoSPA-5-Regional.png


Firewall & Security

  • You will also want to set up firewall rules, as per the VoIP Firewall page.
  • Also see the VoIP Security page for information about securing your VoIP service.