Difference between revisions of "VoIP Phones - Factory Reset"
[unchecked revision] | [unchecked revision] |
CrazyTeeka (talk | contribs) (Creating VoIP Phones - Factory Reset) |
CrazyTeeka (talk | contribs) m |
||
Line 1: | Line 1: | ||
+ | Here's how to Factory Reset your VoIP Phone: |
||
− | Place holder. |
||
+ | |||
+ | =Snom 3xx Series= |
||
+ | Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence: |
||
+ | <syntaxhighlight> |
||
+ | * Volume Up * Volume Down # |
||
+ | </syntaxhighlight> |
||
+ | |||
+ | |||
+ | To set the phone back to "Admin mode", press the Settings key. |
||
+ | |||
+ | - Firmware versions lower than 7.X: Select "Admin Mode". |
||
+ | |||
+ | - Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode". |
||
+ | |||
+ | - On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm. |
Revision as of 11:15, 16 August 2014
Here's how to Factory Reset your VoIP Phone:
Snom 3xx Series
Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:
* Volume Up * Volume Down #
To set the phone back to "Admin mode", press the Settings key.
- Firmware versions lower than 7.X: Select "Admin Mode".
- Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
- On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.