VoIP Phones - Factory Reset: Difference between revisions
CrazyTeeka (talk | contribs) (Creating VoIP Phones - Factory Reset) |
CrazyTeeka (talk | contribs) mNo edit summary |
||
| Line 1: | Line 1: | ||
Here's how to Factory Reset your VoIP Phone: |
|||
Place holder. |
|||
=Snom 3xx Series= |
|||
Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence: |
|||
<syntaxhighlight> |
|||
* Volume Up * Volume Down # |
|||
</syntaxhighlight> |
|||
To set the phone back to "Admin mode", press the Settings key. |
|||
- Firmware versions lower than 7.X: Select "Admin Mode". |
|||
- Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode". |
|||
- On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm. |
|||
Revision as of 11:15, 16 August 2014
Here's how to Factory Reset your VoIP Phone:
Snom 3xx Series
Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:
* Volume Up * Volume Down #
To set the phone back to "Admin mode", press the Settings key.
- Firmware versions lower than 7.X: Select "Admin Mode".
- Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
- On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.