VoIP Phones - Factory Reset: Difference between revisions

From AAISP Support Site
mNo edit summary
mNo edit summary
Line 8: Line 8:




To set the phone back to "Admin mode", press the Settings key.
To set the phone back to "Admin mode", press the Settings key:
*Firmware versions lower than 7.X: Select "Admin Mode".

- Firmware versions lower than 7.X: Select "Admin Mode".
*Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
*On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.

- Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".

- On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.

Revision as of 11:21, 16 August 2014

Here's how to Factory Reset your VoIP Phone:

Snom 3xx Series

Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:

* Volume Up * Volume Down #


To set the phone back to "Admin mode", press the Settings key:

  • Firmware versions lower than 7.X: Select "Admin Mode".
  • Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
  • On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.