VoIP Phones - Factory Reset: Difference between revisions

From AAISP Support Site
mNo edit summary
mNo edit summary
Line 12: Line 12:
*Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
*Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
*On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.
*On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.


Reset lost administrator password by performing a reset to factory defaults via Web User Interface:
*Obtain your phone's IP address and currently used firmware version by pressing the Help button on your Snom 3xx.
*Open any web browser and choose the URL corresponding to your current firmware version:
**Firmware versions lower than 3.X: http://1.2.3.4/set_base_en.htm?reset=Reset
**Firmware versions between 3.X and 6.X: http://1.2.3.4/advanced.htm?reset=Reset
**Firmware versions from 7.X onwards: http://1.2.3.4/advanced_network.htm?reset=Reset
*Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.
*The phone reboots automatically and everything will be accessible again.

Revision as of 11:35, 16 August 2014

Here's how to Factory Reset your VoIP Phone:

Snom 3xx Series

Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:

* Volume Up * Volume Down #


To set the phone back to "Admin mode", press the Settings key:

  • Firmware versions lower than 7.X: Select "Admin Mode".
  • Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".
  • On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.


Reset lost administrator password by performing a reset to factory defaults via Web User Interface:

  • Obtain your phone's IP address and currently used firmware version by pressing the Help button on your Snom 3xx.
  • Open any web browser and choose the URL corresponding to your current firmware version:
  • Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.
  • The phone reboots automatically and everything will be accessible again.