Difference between revisions of "VoIP Phones - Factory Reset"

From AAISP Support Site
Jump to: navigation, search
[unchecked revision][unchecked revision]
m
m (Reset to factory defaults via Web User Interface)
Line 57: Line 57:
   
 
==Reset to factory defaults via Web User Interface==
 
==Reset to factory defaults via Web User Interface==
Obtain your phone's IP address and currently used firmware version by pressing the Help button on your Snom 3xx.
+
Obtain your phone's IP address and currently used firmware version by pressing the "Help" button on your Snom 3xx.
   
  +
Open any web browser and choose the URL corresponding to your current firmware version (This does not work on the Snom 710):
 
Open any web browser and choose the URL corresponding to your current firmware version:
 
 
*Firmware versions lower than 3.X - http://1.2.3.4/set_base_en.htm?reset=Reset
 
*Firmware versions lower than 3.X - http://1.2.3.4/set_base_en.htm?reset=Reset
 
*Firmware versions between 3.X and 6.X - http://1.2.3.4/advanced.htm?reset=Reset
 
*Firmware versions between 3.X and 6.X - http://1.2.3.4/advanced.htm?reset=Reset
 
*Firmware versions from 7.X onwards - http://1.2.3.4/advanced_network.htm?reset=Reset
 
*Firmware versions from 7.X onwards - http://1.2.3.4/advanced_network.htm?reset=Reset
 
   
 
Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.
 
Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.
 
   
 
The phone reboots automatically.
 
The phone reboots automatically.

Revision as of 16:46, 17 August 2014

How to Factory Reset your VoIP Phone:


Snom 3xx/7xx Series

Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:

* Volume Up * Volume Down #

This does not work on the Snom 710.


Default administrator password is "0000".


Reset to factory defaults via Phone Interface

Snom 300:

  • Press "Navigation" down to enter the "Settings" menu.
  • Scroll down to "Configuration".
  • Press "Confirm" button.
  • Scroll down to "Reset".
  • Press "Confirm" button.
  • Press button under "Reset" on display.
  • Enter the administrator password then press "Confirm" button.

Snom 320:

  • Press "Settings" button to enter the "Settings" menu.
  • Scroll down to "Configuration".
  • Press "Confirm" button.
  • Scroll down to "Reset".
  • Press "Confirm" button.
  • Press button under "Reset" on display.
  • Enter the administrator password then press "Confirm" button.

Snom 360:

  • Press "Settings" button to enter the "Settings" menu.
  • Press 10 for "Maintenance" menu.
  • Press 5 for "Reset Values".
  • Press "Confirm" button.
  • Enter the administrator password then press "Confirm" button.

Snom 370:

  • Press "Settings" button to enter the "Settings" menu.
  • Press 10 for "Maintenance" menu.
  • Press 5 for "Reset Values".
  • Press "Confirm" button.
  • Enter the administrator password then press "Confirm" button.

Snom 710:

  • Press button under "Settin" on display.
  • Press 5 for "Maintenance" menu.
  • Press 4 for "Reset Values".
  • Enter the administrator password then press "Confirm" button.


The phone reboots automatically.


Reset to factory defaults via Web User Interface

Obtain your phone's IP address and currently used firmware version by pressing the "Help" button on your Snom 3xx.

Open any web browser and choose the URL corresponding to your current firmware version (This does not work on the Snom 710):

Copy the appropriate URL into the address line of your web browser and then change "1.2.3.4" to your phone's actual IP address.

The phone reboots automatically.