VoIP Phones - Factory Reset

From AAISP Support Site
Revision as of 11:15, 16 August 2014 by CrazyTeeka (talk | contribs)
Jump to: navigation, search

Here's how to Factory Reset your VoIP Phone:

Snom 3xx Series

Since firmware version 8.7.3.7 on the Snom 3xx Series it is possible to reset the phone using the key pad by pressing the following key sequence:

* Volume Up * Volume Down #


To set the phone back to "Admin mode", press the Settings key.

- Firmware versions lower than 7.X: Select "Admin Mode".

- Firmware versions lower equal or greater 7.X: Enter "Maintenance" and select "Admin Mode".

- On the prompt enter your administrator password, if you have set one, or the default password, which is "0000" (four zeros), and confirm.