Back up to the VoIP Configuring page

VoIP Phones - FireBrick

From AAISP Support Site
Revision as of 19:20, 26 February 2017 by Reedy (talk | contribs) (→‎Create a Carrier: username fix)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Pbvoipicon.png Here is a quick overview of configuring the FireBrick to register with AAISP, and then setting up the configuration for a phone to then register against the FireBrick to be able to make and receive calls.

Also see: Voiceless page on

Create the General VoIP config

All the VoIP config is under the VoIP icon on the FireBrick, but we've also included xml below in the examples.


<voip comment="AAISP">


Create a Carrier

<carrier name="AAISP" display-name="Office" allow=" 2001:8b0::/48" registrar="" username="+44123456789" password="secret" extn="100" max-calls="2" comment="Office 0123456789"/>


Create a User

Here we restrict access to this account by our LAN IP range - in this case - change this to your LAN block.

On your phone, you'd set up the account using the credentials set here - i.e. the username and password.

<telephone name="myPhone" display-name="Arnold" username="arnold" password="secret" allow="" ddi="+44123456789" extn="100" carrier="AAISP" max-calls="1"/>


Going Further

This is only a short overview of getting a single phone working with a single carrier - there is much more the FireBrick can do with its built in PBX features. See FireBrick SIP Configuration for more details.