VoIP Phones - FireBrick

From AAISP Support Site
Revision as of 11:53, 14 June 2013 by AA-Andrew (talk | contribs) (Create the General VoIP config:)
Jump to: navigation, search

Pbvoipicon.png Here is a quick overview of configuring the FireBrick to register with AAISP, and then setting up the configuration for a phone to then register against the FireBrick to be able to make and receive calls.

Also see: Voiceless page on aa.net.uk

Create the General VoIP config:

All the VoIP config is under the VoIP icon on the FireBrick, but we've also included xml below in the examples. FIreBrick-Menu.png

<voip comment="AAISP">


Create a Carrier:

<carrier name="AAISP" display-name="Office" allow=" 2001:8b0::/48" registrar="voiceless.aa.net.uk" username="0123456789" password="secret" extn="100" max-calls="2" comment="Office 0123456789"/>


Create a User

Here we restrict access to this account by our LAN IP range - in this case - change this to your LAN block.

On your phone, you'd set up the account using the credentials set here - ie the username and password.

<telephone name="myPhone" display-name="Arnold" username="arnold" password="secret" allow="" ddi="+44123456789" extn="100" carrier="AAISP" max-calls="1"/>


Going Further

This is only a short overview of getting a single phone working with a single carrier - there is much more the FireBrick can do with it's built in PBX features. See FireBrick SIP Configuration for more details.