VoIP SIP Trunks

From AAISP Support Site
Revision as of 09:59, 30 May 2014 by AA-Andrew (talk | contribs)

Go to the VoIP Category

A SIP Trunk is a service where by VoIP calls are routed to and from SIP servers. A customer may have their own SIP Server/PBX, and need a 'SIP Trunk' service in order to make and receive calls though AAISP.

Outbound SIP Trunks

SIP trunks are available from AAISP. In practice all VoIP accounts from AAISP can be used as a SIP Trunk, in that the SIP account can be used to make multiple outbound calls.

There is no limit on the number of outbound calls you can make with an AAISP VoIP account, simply use the username/password and the server in your PBX config.

If you'd like SIP trunks from AAISP, then please do contact the Sales department.

CLI/Presentation Number

For outbound calls, we will allow you to present the CLI of any number which has a base number that points to the number you're using as authentication.

We are also able to set up an additional number on request, see VoIP Presentation Number.

Inbound SIP Trunks

Inbound calls can be routed to a registered SIP phone, redirected to another number or routed to your own SIP server. To help where a customer may have a block of numbers the AAISP Control Pages have a concept of grouping numbers together to use a common number as their settings.

Base/Group Numbers

AAISP are able to provide multiple phone numbers, and blocks of numbers, eg blocks of 10, 20, 100, 1000 etc.

On the Control Pages blocks of numbers can be configured in such a way that there is a 'Base' Number, and all other numbers have the Base set in the Group settings. With this setup the individual number mirror the settings on the Master.

This means that settings can be changed on the Base Number which affect all numbers in the Group.

Base Number setting on Control Page

When a number has a Base set, then many of the settings for that number are hidden - as it will inherit its settings from the Base number.

Then on the Base number, you can set Incoming calls to be set to your server

SIP to your server, put the credentials that your server is expecting

For example, say you have a block of 10 numbers, they end 0-9. Set all the 'SIP to Server' settings on the number ending 0, then on the 9 other numbers set the Base/group setting to be the number ending 0. This then makes all the number inherit the settings from the 0 number.

Other VoIP Features:

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1>Category:VoIP Features</ncl>