Difference between revisions of "ZyXEL GS1900-8"

From AAISP Support Site
Jump to: navigation, search
[quality revision][quality revision]
m (Configuration)
m (Configuration)
Line 20: Line 20:
 
https is enable by default, albeit with a certificate that will give browser warnings
 
https is enable by default, albeit with a certificate that will give browser warnings
   
  +
When you make a change to the configuration you must click Save from the top/right corner of the web interface
   
 
==Accessing the switch==
 
==Accessing the switch==
Line 43: Line 44:
 
***Drag Port08 to the tagged area
 
***Drag Port08 to the tagged area
 
***Click Next, then click Finish
 
***Click Next, then click Finish
  +
*Click Save from the top/right corner of the web interface
   
 
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:
 
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:
   
**From the front page, Click VLAN
+
*From the front page, Click VLAN
 
**Create a new VLAN, enter in 102, then Click Next
 
**Create a new VLAN, enter in 102, then Click Next
 
***Drag Port02 to the Untagged area
 
***Drag Port02 to the Untagged area
 
***Drag Port08 to the tagged area
 
***Drag Port08 to the tagged area
 
***Click Next, then click Finish
 
***Click Next, then click Finish
  +
*Click Save from the top/right corner of the web interface
*Click VLAN
 
  +
  +
*From the front page, Click VLAN
 
**Create a new VLAN, enter in 103, then Click Next
 
**Create a new VLAN, enter in 103, then Click Next
 
***Drag Port03 to the Untagged area
 
***Drag Port03 to the Untagged area
 
***Drag Port08 to the tagged area
 
***Drag Port08 to the tagged area
 
***Click Next, then click Finish
 
***Click Next, then click Finish
  +
*Click Save from the top/right corner of the web interface
*Click VLAN
 
  +
  +
*From the front page, Click VLAN
 
**Create a new VLAN, enter in 104, then Click Next
 
**Create a new VLAN, enter in 104, then Click Next
 
***Drag Port04 to the Untagged area
 
***Drag Port04 to the Untagged area
 
***Drag Port08 to the tagged area
 
***Drag Port08 to the tagged area
 
***Click Next, then click Finish
 
***Click Next, then click Finish
  +
*Click Save from the top/right corner of the web interface
   
 
==Change admin password==
 
==Change admin password==
Line 67: Line 74:
 
**Click the Modify icon next to the admin user
 
**Click the Modify icon next to the admin user
 
**Enter in your new password and click Apply.
 
**Enter in your new password and click Apply.
  +
*Click Save from the top/right corner of the web interface
   
 
==Further, Optional settings==
 
==Further, Optional settings==
Line 75: Line 83:
 
**Enter in Name, Location, Contact details as you wish
 
**Enter in Name, Location, Contact details as you wish
 
**Click Apply
 
**Click Apply
  +
*Click Save from the top/right corner of the web interface
   
 
Optionally, If you wish, you can set Names for your VLANs:
 
Optionally, If you wish, you can set Names for your VLANs:
Line 83: Line 92:
 
**Click Apply
 
**Click Apply
 
*Repeat for the other VLANs
 
*Repeat for the other VLANs
  +
*Click Save from the top/right corner of the web interface
   
 
Optionally, if you wish, you can name the Ethernet ports
 
Optionally, if you wish, you can name the Ethernet ports
Line 89: Line 99:
 
**Tick the bot next to Port 1, Click Edit
 
**Tick the bot next to Port 1, Click Edit
 
**Set the name to, say, Modem1
 
**Set the name to, say, Modem1
*Reat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
+
*Repat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
  +
*Click Save from the top/right corner of the web interface

Revision as of 10:50, 30 January 2017

Overview

The GS1900-8 is a fanless 8 port managed switch.

Configuration

Factory Default Admin Username/Password

Note: If AAISP configured the switch then the credentials will be different

Default/Factory Password
IP: 192.168.1.1
Username: admin
Password: 1234

https is enable by default, albeit with a certificate that will give browser warnings

When you make a change to the configuration you must click Save from the top/right corner of the web interface

Accessing the switch

  • Set your computer to be on an IP in the subnet that the switch is in, eg, 192.168.1.100/255.255.255.0
  • In your browser, go to http://192.168.1.1
  • Login with the default credentials as above


VLAN config

When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions.

We'll configure the switch as:

  • Port 1 - VLAN 101, for ADSL line 1
  • Port 2 - VLAN 102, for ADSL line 2
  • Port 3 - VLAN 103, for ADSL line 3
  • Port 4 - VLAN 104, for ADSL line 4
  • Port 8 is for the FireBrick

Creating the VLANs

  • Click VLAN
    • Create a new VLAN, enter in 101, then Click Next
      • Drag Port01 to the Untagged area
      • Drag Port08 to the tagged area
      • Click Next, then click Finish
  • Click Save from the top/right corner of the web interface

This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:

  • From the front page, Click VLAN
    • Create a new VLAN, enter in 102, then Click Next
      • Drag Port02 to the Untagged area
      • Drag Port08 to the tagged area
      • Click Next, then click Finish
  • Click Save from the top/right corner of the web interface
  • From the front page, Click VLAN
    • Create a new VLAN, enter in 103, then Click Next
      • Drag Port03 to the Untagged area
      • Drag Port08 to the tagged area
      • Click Next, then click Finish
  • Click Save from the top/right corner of the web interface
  • From the front page, Click VLAN
    • Create a new VLAN, enter in 104, then Click Next
      • Drag Port04 to the Untagged area
      • Drag Port08 to the tagged area
      • Click Next, then click Finish
  • Click Save from the top/right corner of the web interface

Change admin password

  • From the front page, click the settings/Cog icon on the left
  • Click Management, then Users
    • Click the Modify icon next to the admin user
    • Enter in your new password and click Apply.
  • Click Save from the top/right corner of the web interface

Further, Optional settings

Optionally, if you wish, you can name the switch:

  • From the front page, click the settings/Cog icon on the left
    • Click System, then Information
    • Enter in Name, Location, Contact details as you wish
    • Click Apply
  • Click Save from the top/right corner of the web interface

Optionally, If you wish, you can set Names for your VLANs:

  • From the front page, click the settings/Cog icon on the left
  • Click VLAN, then VLAN
    • Click the modify icon to the right of VLAN 101
    • Change the name from VLAN0101 to, say, PPP101
    • Click Apply
  • Repeat for the other VLANs
  • Click Save from the top/right corner of the web interface

Optionally, if you wish, you can name the Ethernet ports

  • From the front page, click the settings/Cog icon on the left
  • Click Port, then Port
    • Tick the bot next to Port 1, Click Edit
    • Set the name to, say, Modem1
  • Repat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
  • Click Save from the top/right corner of the web interface