12,264
edits
ZyXEL GS1900-8: Difference between revisions
m
→Factory Default Admin Username/Password
(Created page with "==Factory Default Admin Username/Password== Note: If AAISP configured the switch then the credentials will be different {|class="wikitable" !colspan="3"|Default/Factory Passwo...") |
|||
|
=Overview=
The GS1900-8 is a fanless 8 port managed switch.
=Configuration=
==Factory Default Admin Username/Password==
Note: If AAISP configured the switch then the credentials will be different
|1234
|}
https is enable by default, albeit with a certificate that will give browser warnings
==VLAN config==
When using with a FireBrick for bonding multiple lines we can use VLANS for each of the PPP sessions.
We'll configure the switch as:
*Port 1 - VLAN 101, for ADSL line 1
*Port 2 - VLAN 102, for ADSL line 2
*Port 3 - VLAN 103, for ADSL line 3
*Port 4 - VLAN 104, for ADSL line 4
*Port 8 is for the FireBrick
===Accessing the switch====
*Click VLAN
**Create a new VLAN, enter in 101, then Click Next
***Drag Port01 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:
**From the front page, Click VLAN
**Create a new VLAN, enter in 102, then Click Next
***Drag Port02 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click VLAN
**Create a new VLAN, enter in 103, then Click Next
***Drag Port03 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click VLAN
**Create a new VLAN, enter in 104, then Click Next
***Drag Port04 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
Optionally, if you wish, you can name the switch:
*From the front page, click the settings/Cog icon on the left
**Click System, then Information
**Enter in Name, Location, Contact details as you wish
**Click Apply
Optionally, If you wish, you can set Names for your VLANs:
*From the front page, click the settings/Cog icon on the left
*Click VLAN, then VLAN
**Click the modify icon to the right of VLAN 101
**Change the name from VLAN0101 to, say, PPP101
**Click Apply
*Repeat for the other VLANs
Optionally, if you wish, you can name the Ethernet ports
*From the front page, click the settings/Cog icon on the left
*Click Port, then Port
**Tick the bot next to Port 1, Click Edit
**Set the name to, say, Modem1
*Reat the above for ports 2, 3, and 4. For port 8, name that FireBrick.
| |||