12,274
edits
Router - EchoLife HG612: Difference between revisions
m
→Update to latest unlocked firmware
|
To upgrade to this firmware, do the following:
* With the HG612 powered off, connect a cable between the LAN2 port
**(you may need to remove the "not in use" sticker) and the ethernet
port on your computer.
* Configure your computer's ethernet port with the IP address
**192.168.1.100 and subnet mask 255.255.255.0.
* Hold down the reset button on the back of the HG612 whilst inserting the power cable. Keep the rest button held for about 5-10 seconds after powering up.▼
* After about 10 seconds you should be able to access the HG612's "Update Software" web page at the address http://192.168.1.1▼
▲* Hold down the reset button on the back of the HG612 whilst inserting
▲* After about 10 seconds you should be able to access the HG612's
* Follow the on-screen instructions to upload the latest firmware.
main web interface at the same http://192.168.1.1 address. The
default username and password are "admin" and "admin".
=How to connect to your router=
| |||