12,270
edits
FireBrick Road Warrior FireBrick Config: Difference between revisions
FireBrick Road Warrior FireBrick Config (view source)
Revision as of 15:47, 30 July 2015
, 30 July 2015no edit summary
mNo edit summary |
mNo edit summary |
||
|
= FireBrick IPsec config =
In this example we are assuming you can allocate some IP addresses on you LAN. You do this by picking a range of addresses and setting up a roaming-pool (see below). You need to ensure the IP range does not clash with devices on the LAN and is not in the DHCP ranges that could allocate to the LAN. You also need to set proxy-arp on the LAN interface settings to allow communications to other devices on your LAN. Alternatively you could set private IP addresses in the pool and set the nat setting. You should probably also consider firewalling rules for traffic to/from IPsec connections.
The FireBrick needs a configuration for the connection, and roaming pools and user identities. The connection can be used for any number of devices at once with the same pool of IP addresses; each would have a user name and password defined.
| |||