Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

IPsec Firewall: Difference between revisions

IPsec Firewall (view source)

Revision as of 19:48, 30 July 2015

20 bytes added ,  30 July 2015
m
no edit summary
mNo edit summary
mNo edit summary
<indicator name="Tunnels">[[File:Menu-IPsec.svg|link=:Category:FireBrick_IPsec|30px|Back up to the FireBrick IPsec Tunnels Category Page]]</indicator>
If there is no NAT involved, you need UDP port 500 for the IKE control channel, and IP protocol ESP (50) for the data channel.:
*UDP port 500 for the IKE control channel
*IP protocol ESP (50) for the data channel.
 
If NAT has been detected, or you force IKE to believe NAT is present (see below) you need UDP port 4500 only (no need for protocol ESP). You may need UDP port 500 too, to allow the initial contact to be made - though as soon as NAT is detected (or it has been forced) IKE switches to 4500.:
*UDP port 4500 only (no need for protocol ESP).
*You may need UDP port 500 too, to allow the initial contact to be made - though as soon as NAT is detected (or it has been forced) IKE switches to 4500.
*UDP 4500 for IKE
 
The config force-NAT option [Note the capitalisation ] can be used to force IKE to treat the connection as if it was NATed. This is in the top-level ipsec-ike config item and you need "Show all" on the UI.
AA-Andrew
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,341

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/10266’