12,467
edits
ZyXEL GS1900-8: Difference between revisions
m
→Configuration
m (→Configuration) |
m (→Configuration) |
||
|
https is enable by default, albeit with a certificate that will give browser warnings
When you make a change to the configuration you must click Save from the top/right corner of the web interface
==Accessing the switch==
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface
This process repeats for VLAN 102, 103, 104 but you use Port02 for VLAN 102, Port03 for VLAN 103, Port04 for VLAN 104... so:
**Create a new VLAN, enter in 102, then Click Next
***Drag Port02 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface
*From the front page, Click VLAN
**Create a new VLAN, enter in 103, then Click Next
***Drag Port03 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface
*From the front page, Click VLAN
**Create a new VLAN, enter in 104, then Click Next
***Drag Port04 to the Untagged area
***Drag Port08 to the tagged area
***Click Next, then click Finish
*Click Save from the top/right corner of the web interface
==Change admin password==
**Click the Modify icon next to the admin user
**Enter in your new password and click Apply.
*Click Save from the top/right corner of the web interface
==Further, Optional settings==
**Enter in Name, Location, Contact details as you wish
**Click Apply
*Click Save from the top/right corner of the web interface
Optionally, If you wish, you can set Names for your VLANs:
**Click Apply
*Repeat for the other VLANs
*Click Save from the top/right corner of the web interface
Optionally, if you wish, you can name the Ethernet ports
**Tick the bot next to Port 1, Click Edit
**Set the name to, say, Modem1
*
*Click Save from the top/right corner of the web interface
| |||