|
A factory default FireBrick configuration will work with a ZTE MF823 dongle without any additional configuration
So, as BT apparently want to take an age to get a connection in, I wanted to get online with a FB and a 4G stick, in this case, a non vendor locked ZTE MF823 from Amazon, and an ASDA sim.
*The FireBrick will DHCP an address in the 192.168.0.x range from the ZTE dongle
*You can access the dongle's web interface via http:192.168.0.1
Dongle is on default IP address of <tt>192.168.0.1</tt> and tested on a FireBrick 2700 Fully Loaded, with 1.42.100 firmware.
*There will be NAT performed by the FireBrick and then again by the dongle
== Config ==
<source lang=xml>
<?xml version="1.0" encoding="UTF-8"?>
<do-not-load xmlns="http://firebrick.ltd.uk/xml/fb2700/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://firebrick.ltd.uk/xml/fb2700/ http://firebrick.ltd.uk/download/FB2701/xml/fb2700/1.42.100.xsd"
timestamp="2015-07-31T03:14:44Z"
patch="24825">
<system log-panic="fb-support"/>
<user name="admin"
password="secret"/>
<log name="default"
comment="General logging for web viewing"/>
<log name="fb-support"
comment="Log target for sending logs to FireBrick support team">
<email to="crashlog@firebrick.ltd.uk"
delay="10"
comment="Crash logs emailed to FireBrick Support team"/>
</log>
<services>
<ntp/>
<telnet/>
<http local-only="true"/>
<dns resolvers="8.8.8.8 8.8.4.4">
<host name="my.firebrick.co.uk my.firebrick.uk"/>
</dns>
</services>
<port name="LAN1"
ports="1 2 3 4"/>
<port name="DONGLE1"
ports=""
dongle="dongle"/>
<interface name="LAN1"
port="LAN1"
ra-client="false"
comment="Default LAN interface">
<subnet name="Default IPs"
ip="2001:db8::1/64 10.0.0.1/24"
ra="false"
nat="true"
comment="Temporary IPs for setup only, delete when finished configuring"/>
<dhcp name="Auto allocated IPs"
comment="Allocates IP addresses automatically"/>
</interface>
<interface name="Dongle_1"
port="DONGLE1">
<subnet ip="192.168.0.100/24"
gateway="192.168.0.1"/>
</interface>
<usb>
<dongle name="dongle"
nat="true"
graph="Dongle"
log="default"/>
</usb>
<rule-set name="NAT: LAN to Internet"
source-ip="10.0.0.0/24"
no-match-action="continue">
<rule target-interface="self LAN1"
comment="Not to self or LAN"/>
<rule set-source-ip="192.168.0.100"
set-nat="true"/>
</rule-set>
<rule-set name="Firewall: LAN"
target-interface="LAN1"
no-match-action="reject"
comment="Default firewall rule for traffic to LAN">
<rule name="Allow Firebrick"
source-interface="self"
comment="Allow all from the FireBrick to LAN"/>
</rule-set>
</do-not-load>
</source>
[[Category:FireBrick]]
[[Category:Data SIMs]]
| 