Changes

Jump to: navigation, search

FireBrick L2TP Server

664 bytes added, 23:55, 17 August 2018
clean up
__NOTOC__<indicator name="L2TP">[[File:Menu-L2TP-Relay.svg|link=:Category:L2TP_HandoverL2TP Handover|30px|Back up to the L2TP Handover page]]</indicator>
[[File:2700-small.png|link=:Category:FireBrick]]
 
=Overview=
A FireBrick can be easily configured to act as an LNS (L2TP Network Server) - you can then terminate direct L2TP connections on it from remove devices, or relay data SIMs or DSL circuits on to it (where the ISP support s L2TP relay - we do on the A&A Data SIMs and DSL services) This means, you can have remote 3G/4G LTE Mobile Data SIMs or DSL circuits terminated directly on to your LAN or a VLAN on your internal network.
 
This is ideal for remote monitoring, digital signage, machine-to-machine networking, IoT etc... As the remote device is being terminated on the FireBrick, you have full control over firewall and internet access to and from the remote device.
 
*A 'Fully Loaded' FireBrick is required for [[L2TP]] features
*AAISP Data SIMS can be relayed on to your own [[L2TP]] Server, such as a FireBrick. This will enable a remote SIM to be connected directly to your LAN and have an IP on your LAN, very similar to a VPN.
*The FireBrick allocates IPs statically within the config and can't use DHCP - for more advanced and more flexible configurations you'd run your own RADIUS server.
 
[[File:FireBrick-L2TP-Diagram.jpg|100px|frame600px|An attempt at a network diagram showing the SIM on the internal LAN]]
 
=FireBrick Config=
 
 
[[Category:FireBrick_TunnelsFireBrick Tunnels|L2TP]]
[[Category:L2TP Handover]]
526
edits

Navigation menu