Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VMG1312-B10A: Bugs: Difference between revisions

VMG1312-B10A: Bugs (view source)

Revision as of 00:22, 18 August 2018

1 byte added ,  18 August 2018
clean up, typos fixed: miliseconds → milliseconds
m (Mention the 3rdparty firmware build which supports 1508 byte MTU)
(clean up, typos fixed: miliseconds → milliseconds)
==Long PADI retry time==
====Issue Description====
When PPP or sync drops, the router will need to reconnect. Once in sync, the router will send a PADI packet to start the process of logging back in. It seems the router sends a PADI every 100 seconds or so. This causes unnecessary delay in reconnecting. Our FireBrick product, for example, will start off trying every 100 milisecondsmilliseconds before it starts backing off to every 2 seconds and then a maximum of every 10 seconds. We've asked ZyXEL for more information on the PADI retry and if it can be made to try more often than every 100 seconds.
 
====Date Reported====
====Issue Description====
 
The QoS and traffic limiting features have the potential to be quite useful. However, the default QoS settings have problems if there is a large rsync (over ssh) upload in progress in that DNS queries time out. We have some QoS notes on [[VMG1312-B10A:_QoS QoS]].
 
====Date Reported====
====Resolution====
Disabling default classes, and enabling QoS on packet length seems an all-round good solution
See: [[VMG1312-B10A:_QoS QoS]]
 
 
Reedy
editor
698

edits

Retrieved from ‘http://support.aa.net.uk/Special:MobileDiff/13569’