Changes

Jump to: navigation, search

Router - VyOS

845 bytes added, 21:06, 7 January 2020
Added configuration commands for PPPoE
== Configuring PPPoE ==
 
This configures PPPoE on the WAN interface (eth1).
TBC
 
* Replace the <code>user-id</code> and <code>password</code> with your AAISP username and password
* Note that IPv6 has to be explicitly enabled on the PPPoE interface
* Unlike IPv4, routing for IPv6 isn't enabled automatically when the interface comes up. I had to add a default static route for IPv6.
 
<pre>
set interface ethernet eth1 description "WAN"
 
set interface ethernet eth1 pppoe 0 user-id mxxxx@a.1
set interface ethernet eth1 pppoe 0 password xxxx
set interface ethernet eth1 pppoe 0 mtu 1492
set interface ethernet eth1 pppoe 0 default-route auto
set interface ethernet eth1 pppoe 0 name-server auto
set interface ethernet eth1 pppoe 0 enable-ipv6
set interface ethernet eth1 pppoe 0 ipv6 address autoconf
 
set protocols static interface-route6 ::/0 next-hop-interface pppoe0
</pre>
 
== Example Configuration ==
57
edits

Navigation menu